volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Stabilizer Bar, Sway Control|Front|Page 7107 > < Stabilizer Bar, Sway Control|Front|Page 7105
Page 3
background image

-

the anti-roll bar cap

-

the anti-roll bar.

Note!  Right-hand drive cars: Lift the anti-roll bar. Remove the collision protection system between the steering gear and the sub-frame. Remove
anti-roll bar.

Note!  When replacing the anti-roll bar on cars up to the following chassis numbers: 4-doors 2099893, 5-doors 2011547, carry out the paragraphs
below.

Remove the EVAP canister hose clip. Disconnect the EVAP canister hose at the joint. Cut off a piece of protective hose, P/N 185507-1,
approximately 480 mm (18.9 inch) long. Thread it over the canister hose and reconnect the joint.

Installation 

Install: 

Stabilizer Bar, Sway Control|Front|Page 7107 > < Stabilizer Bar, Sway Control|Front|Page 7105