S80 L5-2.5L Turbo VIN 59 B5254T2 (2004)
Seat Back: Service and Repair
Front Seat, Driver's Seat, Front Seat
Replacing WHIPS
Note! This inspection must be carried out after all types of collision. If the deformation element is deformed or the indicator has been triggered,
the deformation element must be replaced.
Removing the WHIPS system
Remove:
-
the seat from the car. See Lifting the front seats in and out See: Service and Repair/Removal and Replacement/Front Seat/Lifting the Front Seats In
and Out
-
the lumbar support knob. See Lumber support adjustment knob, replacing See: Service and Repair/Removal and Replacement/Front Seat/Lumbar
Support Adjustment Knob, Replacing
-
the backrest adjustment knob. See Backrest adjustment knob See: Front Seat/Backrest Adjustment Knob
Turn the adjuster or run the backrest adjustment to the maximum reclining position.
Release the adjustment mechanism (C). Fold the backrest forwards.
Note! Be careful when the spring releases. There is considerable force in the spring.
Remove the spring (D).
Remove:
-
the indicator pin or its remains.
This applies only to cars up to the following chassis number.
S80: -167986
V70 Volvo Torslanda (VTM): -56776
V70 Volvo Europe Car (VEC): -57997
V70XC: -6475
S60: -1499
-
one nut (B) on each side
-
one spindle (E) from each side.