S80 L5-2.5L Turbo VIN 59 B5254T2 (2004)
Seat Back: Service and Repair
Upholstery Back Rest, Replacing
Upholstery back rest, replacing
Removal
Removing backrest
Note! As the illustrations in this service information are used for different model years and / or models, some variation may occur. However,
the essential information in the illustrations is always correct.
Note! To carry out this work a zip fastener is required. This is not included in the upholstery but is ordered separately. 6 mm zip fastener part
number: 3533976 is used and in some cases zip fastener 4 mm, part number: 9459316
Fold up the cushion.
Remove:
-
the side cushion. See Side cushion See: Service and Repair/Removal and Replacement/Side Cushion. Disconnect the connector by the hinge
-
screw mounting by the hinge
-
the screw for the seatbelt end mounting.
Remove the strap(s) for the fold-down mechanism and seat belt buckles (hooked onto the lower edge of the backrest).
Lift out the backrest.
Removing the backrest upholstery (40%)
Remove:
-
the lock side piece. See Lock side piece See: Service and Repair/Removal and Replacement/Lock Side Piece
-
the end piece. See Side piece See: Service and Repair/Removal and Replacement/Side Piece
