S80 L6-3.2L VIN 98 B6324S (2007)
The rounded corners will prevent the cable end from getting stuck against the shifter housing. Re-install the cable.
5. There is a sensor arm which indicates the position of the shift lock solenoid to the GSM (Gear Selector Module). The arm is made up of two
pieces; a white link and a black end. Check that the arm is corrected located in its track. Reposition it if it is dislodged.
6. There is one black plastic indicator on the arm and one on the GSM. Check that the arm is correctly adjusted by making sure the two indicators are
aligned. If the marks are not aligned, adjust it by sliding the black end in or out along the white link.