S80 FWD L6-3.2L VIN 98 B6324S (2010)
disturbed and DTC CEM B113187 is set.
The fault will not occur once the wiper has been activated during present driving cycle.
The CEM software has been optimized.
If the symptom has been identified:
Reset the Wiper Motor Module by removing the fuse F9 - 11B9 for 10 seconds.
install the fuse.
Then perform a CEM upgrade.
SW P/N for 124135 and 136: 30786042.
SW P/N for 156: 31270560.
Test the wiper function with wiper stalk activated before starting the car.
*Service info has been updated.
VOLVO STANDARD TIMES GUIDE (VSTG) INFO:
OPERATION NUMBER: 36004-2 Software Download.
"See VSTG for time"
Claims may be submitted under the new car warranty when there is a documented customer complaint using claim type: 01
Labor times are valid at the time of release and are subject to change.