diagnostic functions.

Design and Function

Applies to: 2008–2010; B5254T6

Overview

See: Overview

Misfire diagnostic

See: Misfire diagnostic

Camshaft diagnostics (CVVT)

See: Camshaft diagnostics (CVVT)

Leak diagnostics (certain markets only)

See: Leak diagnostics, original version (certain markets only)

Heated oxygen sensor (HO2S) diagnostic

See: Heated oxygen sensor (HO2S) diagnostic

Three-way catalytic converter (TWC) diagnostics

See: Three-way catalytic converter (TWC) diagnostics

Fuel pressure regulation, diagnostics

See: Fuel pressure regulation, diagnostics

Ethanol-related fuel control (only applies to version flexifuel)

See: Control, Flexifuel (B5254T8)

Oil level and oil temperature sensor, diagnostics (certain markets only)

See: Oil level and oil temperature sensor, diagnostics (certain markets only)

Applies to: 2010–2013; MPS6

General

The control module has a built-in diagnostic system, Volvo Diagnostic, which continuously monitors internal functions as well as input and output signals.

Diagnostic trouble codes (DTCs)

If the control module detects a fault then it stores a diagnostic trouble code (DTC). If a fault disappears for any reason after a diagnostic trouble code (DTC) has been permanently stored in the control module then the information on the diagnostic trouble code (DTC) remains in the control module.

Reading and erasing diagnostic trouble codes (DTCs)

Stored diagnostic trouble codes (DTCs) can be read off and erased using this function.

Diagnostic trouble codes (DTCs) can only be erased once all the diagnostic trouble codes (DTCs) have been read off at least once.

Reading off input and output signals

The status for some of the control module's input and output signals can be continuously read off using this function.

For more information about parameters, see Vehicle communication information in Specifications, other.

Reading off the control module identification

The control module can be identified by means of reading off a number of codes.

The codes contain the following information about the control module:

• hardware P/N (control module without software)
• hardware serial number (control module without software)
• software P/N
• diagnostic software P/N.