volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Procedures|Page 11035 > < Procedures
Page 2
background image

-

Open the tailgate. Support the tailgate.

-

Lift up the lock unit for the gas strut on the both sides. Pull the gas strut off the ball joint.

-

Lubricate the ball joint. Press the gas struts into place. Check that the gas strut is secure.

NOTE:  When replacing gas struts, drain the gas from the old strut.

-

Drill a 4 mm hole as illustrated.

WARNING:  Use protective goggles when drilling.

Procedures|Page 11035 > < Procedures