volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Protective Film, Installing|Page 11410 > < Protective Film, Installing|Page 11408
Page 25
background image

Volvo's metallic paint is a two coat type. This consists of a base metallic coat at the bottom and a 2 comp varnish coat at the top. This system gives a
good finish and good color durability.
For the work data on the paint refer to the specifications, see  Application data for paint materials See: Application and ID/Application Data For Paint
Materials.

Stir the metallic base coat well from the start.

This is important in order to reduce the risk of color defects.

Dilute the metallic base paint to the correct spray viscosity 

Use the prescribed thinner. Other thinners may result in patches.

Note! When repairing base solid paintwork, a test panel should always be painted in order to check the color.

Spray viscosity 16-18 seconds SIS cup 4mm/20°C.

Adjust the paint sprayer.

Protective Film, Installing|Page 11410 > < Protective Film, Installing|Page 11408