V40 L4-1.9L Turbo VIN 29 B4204T3 (2002)
Evaporative Emission Control Canister: Service and Repair
Replacing EVAP Canister
Removing fuel tank
-
Remove the fuel tank.
Removing the EVAP canister
WARNING: Protective gloves and protective goggles should be used for the following operations because of the risk of fuel spillage.
Remove:
-
connector/outlet. Press in the catch and pull
-
Connector/inlet. Press in the catch and pull
-
three screws holding the canister
-
outlet hose from the leak diagnostic pump.
Installing the EVAP canister
In reverse order.
Reinstall fuel tank
-
Reinstall fuel tank according to Fuel tank, replacing.
Finishing
Check that the fuel line and fuel pipes are installed so that they do not rub or cause rattling.
Start the engine and check for fuel leakage.
Proceed to VADIS vehicle communication and carry out the leak diagnostic test.