V40 L4-1.9L Turbo VIN 29 B4204T3 (2002)
Press the cut-off cables into the casing without damage or sticking other parts. Tape if necessary.
Place the carpet back into position.
Install the:
-
C-post panel
-
rear seat
-
connector to the SRS control module
-
rear center console
-
side cushion for the backrest
-
sill trim panels.
Carry out a final check according to method E.
C. Repl. Termin. In the Connector For the (SRS) Control Module
C:
Removing and installing the service cable harness from the connector to the supplemental restraint system control module (SRS)
Removing the SRS control module connector