V40 L4-1.9L Turbo VIN 29 B4204T3 (2002)
Steering Wheel: Procedures
Steering Wheel Module And Steering Wheel
Special Tools: 951 1506
Preparations
Prepare the car.
Removing The Steering Wheel Module
-
Remove the steering column covers.
-
Turn the ignition switch to position I so that the steering wheel lock is disengaged
-
Slacken off the two Torx 30 screws (angled at 45°) on the reverse of the steering wheel
-
Disconnect the SRS switches (A) from the steering wheel module by pressing the catches on the side
-
Carefully pull the switch straight out. Do not use tools which can damage the switch.
-
Remove the steering wheel module
-
Place the steering wheel module with the switch side downwards in a safe place. The steering wheel module must not covered with anything
Connecting Special Tool 951 1506 To The Steering Wheel Module Connectors