V40 L4-1.9L Turbo VIN 29 B4204T3 (2002)
Installing the steering gear housing on the steering column
Install:
-
the front wheel. Lower the car
-
the pinion shaft by pressing down as far as possible. Tighten the screw. Tighten to 17 Nm
-
a new tie strap on the intermediate plate
-
the floor carpet on the driver's side.
Filling and bleeding the power steering system
Bleed and fill the power steering system. See Checking power steering balance and pump pressure See: Testing and Inspection/Checking Power Steering
Balance and Pump Pressure.