V50 L5-2.4L VIN 39 B5244S7 (2005)
Remove the blind cover plug from the hole for the adjustment tool. Turn the crankshaft clockwise slightly. Use: 999 5451.
Aligning the crankshaft
Turn the crankshaft counter-clockwise until it stops against the adjustment tool. Check that the marking on the crankshaft timing gear pulley
corresponds to the marking on the oil pump.
Installing the variable valve timing (VVT) unit on the intake camshaft
Press the timing gear pulley and variable valve timing (VVT) unit on to the camshaft. Set the variable valve time (VVT) unit according to the marking.
Install:
-
the center screw that secures the VVT unit to the camshaft. Do not tighten the screw
-
the upper timing belt cover.
Installing the timing gear pulley on the exhaust camshaft
Install:
