V50 L5-2.4L VIN 39 B5244S7 (2005)
Evaporator Temperature Sensor / Switch: Service and Repair
Temperature Sensor Evaporator
NOTE: The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the essential
information in the illustrations is always correct.
Preparatory work
Ignition off
Ignition off.
Removal
Removing the temperature sensor for the evaporator
Fold down the carpet in the driver's side footwell towards the heater unit.
Turn the temperature sensor together with the cable harness a ¼ turn clockwise.
Pull the temperature sensor straight out. Remove the temperature sensor.
Remove the connector.
Installation
Installing the temperature sensor for the evaporator
Connect the connector.
Align the hooks for the temperature sensor in the opening so that the connector is turned down.
Place the temperature sensor down against the surface of the heater unit. Turn the temperature sensor a ¼ turn counter-clockwise.
Finishing
Testing the climate control system
Carry out a performance test on the climate control unit.
