V50 L5-2.4L VIN 39 B5244S7 (2005)
Remove:
-
the belt tensioner
-
the idler pulley and discard both.
Installation
Note! For tightening torques, see Specifications. See: Engine, Cooling and Exhaust/Engine/Specifications/Mechanical Specifications/Tightening
Torque
Installing new tension pulley and idler pulley
Caution! The tension pulley and idler pulley must always be replaced when replacing the timing belt.
Install:
-
a new tension pulley together with the center screw. Screw in the center screw by hand. Ensure that the tensioner fork is centered over the cylinder
block rib. Ensure that the Allen hole on the eccentric is at 10 o'clock
-
new idler pulley. Tighten the screws.
Installing the timing belt
