volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Reading and Clearing Diagnostic Trouble Codes|Page 467 > < Reading and Clearing Diagnostic Trouble Codes|Page 465
Page 1
background image

Global Positioning System Module: Programming and Relearning

Downloading software and replacing the control module

New software can be downloaded into the global positioning system module (GPS). When ordering software, the hardware and the software in the car is
compared to the information in the Volvo central database. If the comparison is OK the software is downloaded to the control module.
If the comparison between the car and Volvo central database is not OK, the database is updated with the car configuration. When this is complete the
software is downloaded.
After replacing a control module, the unique ID number of the control module must be programmed in the central electronic module (CEM). For further
information, see Design and Function, MOST network.

Reading and Clearing Diagnostic Trouble Codes|Page 467 > < Reading and Clearing Diagnostic Trouble Codes|Page 465