V50 L5-2.4L VIN 39 B5244S7 (2005)
NOTE: Do not apply rust solvent spray or grease to the Heated Oxygen Sensor (HO2S) or combined instrument panel connectors.
Disconnect the battery negative terminal
Use compressed air to clean the disconnected connector
Apply rust solvent spray 1161422 to the disconnected connectors
Blow clean using compressed air.
NOTE: Do not fill the protective cover with grease.
Press grease, P/N 1161417-9, into the terminals directly from the tube
Check that all the cavities in the connectors are filled
Use a loose male pin to ensure that contact in sockets is good. The pin should remain in position when pulled gently.
Wiring Harness Supplemental Restraint System (SRS)
Wiring harness supplemental restraint system (SRS)
951 2620 Stripping tool See: Tools and Equipment/951 2620 Stripping tool
951 2777 Hot-air gun See: Tools and Equipment/951 2777 Hot-Air Gun