V70 L5-2.4L VIN 61 B5244S (2004)
-
Position the CD storage box in the glove compartment. Install a rivet as a guide by hand. Do not rivet into place.
-
Hold the opening of the CD storage box parallel with the edge of the glove compartment. Drill the next hole in the CD storage box using the glove
compartment as a template.
-
Install a rivet by hand in the new hole. Do not rivet into place.
-
Drill the last hole in the CD storage box using the glove compartment as a template.
-
Remove the CD storage box.
Install:
-
the glove compartment.
-
the CD bracket in the glove compartment. Use the supplied clips.
-
the frame on the CD bracket.
-
the CD holder in the CD bracket. Ensure that the covers for the CD compartment on the CD holder hang downwards at the open position. Press in
the catches (1).
Applies to the S60, V70 (00-) and the S80
-
Clean the mating surfaces.
-
Rivet the CD storage box and the glove compartment together.
-
Install the frame.
-
Install the CD compartment. Press in the catches (1) (see illustration 2F).
-
Install the spring holder (2) in the upper mounting (see illustration 2F).
-
Close the glove compartment.
Installing in the centre console
Applies to the 960 S90 and the V90
