V70 L5-2.4L VIN 61 B5244S (2004)
-
Measure as illustrated. Mark up for holes in the inside of the CD bracket.
-
Drill out the holes. Use a -6 mm (15/64") drill bit.
-
Position the CD bracket in the centre console. Position the guides towards the driver's seat.
-
Use the CD bracket as a drilling template. Drill a hole using a - 6 mm (15/64") drill in the centre console compartment. Use a 6 mm (15/64") drill
stop.
-
Remove the CD bracket. Drill out the hole in the centre console using a - 6.5 mm (1/4") drill bit. Use a 3 mm (1/8") drill stop.
-
Install the CD bracket in the centre console using the supplied clips.
-
Install the frame on the CD bracket
-
Install the CD holder in the CD bracket. Press in the catches (1).
