volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Bluetooth, Swan Neck Microphone|Page 25044 > < Bluetooth, Swan Neck Microphone|Page 25042
Page 7
background image

-

Close the zip fastener. If the zip fastener catch is missing, use a suitable zip fastener catch from the kit. Close the zip fastener again. Lock the ends
using staples for example

-

Push the ends of the zip fastener inside the upholstery.

Installing the head restraint 

-

Insert curtain wire from the top and down the reverse of the back rest between the upholstery and the padding

-

Tape the switch from the microphone cable to the curtain wire. Pull down through the seat

-

Install the new head restraint.

-

Secure the cable under the seat using tie straps. Secure any excess cable under the seat

-

Connect the cable from the head restraint (1) to the cable harness for the hands free box (2)

-

Secure the cable harness so that it does not come into contact with loose components or sharp edges under the seat.

Connecting the handsfree box 

Nokia 

-

Install the adapter plate (1) on the bracket (2.) Use the screws (3) and the nuts (4).
On cars without an accessory electronic module do not use the long single cable. Hide the single cable. Insulate the cable terminal using a piece of
foam tape from the kit.

Ericsson 

-

Connect the cable from the carphone holder and the cable harness to the hands free box

-

Connect the cable from the radio to the cable harness

-

Screw the hands free box onto the bracket.

Nokia 

Bluetooth, Swan Neck Microphone|Page 25044 > < Bluetooth, Swan Neck Microphone|Page 25042