volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

TV NTSC/PAL|Page 25215 > < TV NTSC/PAL|Page 25213
Page 8
background image

-

Remove the cable (1) between the GPS aerial on the parcel shelf and the DVD reader (the black single cable in the rear edge of the DVD reader)

-

Place the cable to one side. The amplifier will not be reused. There is a new cable harness in the kit.

-

Route the new cable harness (1) in the same way as the old harness

-

Position the connectors for the cable harness at the C-posts and at the rear edge of the wheel house. See the illustration

-

Press the cable harness into place in the parcel shelf with the existing clips

-

Connect the connector to the GPS aerial.

Applies to Japan

-

Remove the ground lead for the rear windscreen. First remove the screw (1). Remove the connector (2) from the rear windscreen at the right-hand
C-post

-

Place the ground lead and the screw to one side. They will not be reused.

Applies to Europe

-

Remove the screw (1). Remove the ground lead from the C-post. A new screw is included in the kit.

TV NTSC/PAL|Page 25215 > < TV NTSC/PAL|Page 25213