volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

TV NTSC/PAL|Page 25216 > < TV NTSC/PAL|Page 25214
Page 9
background image

-

Remove the cables (1, 2) for the existing aerial amplifier on the left C-post

-

Remove the screw (3). Remove the aerial amplifier

-

Place the aerial amplifier to one side. The amplifier will not be reused.

-

Connect the new TV aerial amplifier (blue) to the new AM/FM aerial amplifier (blue) from the kit.

Applies to Japan

-

Carry out the same operation with the new green aerial amplifiers.

Applies to Europe

-

For the EU only use the small green TV aerial amplifier.

Applies to Japan

-

Install the new AM/MPX and TV aerial amplifiers (green) on the right C-post. Ensure that the aerial amplifier guide lugs engage in the two
rectangular holes and in the small round holes

-

Tighten the amplifiers

-

Repeat the operation for the left-hand AM/FM and TV aerial amplifier (blue).

TV NTSC/PAL|Page 25216 > < TV NTSC/PAL|Page 25214