volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Bag Holder|Page 27608 > < Bag Holder|Page 27606
Page 27
background image

-

Press a new clip (from the kit) on the end of the net

-

Position the clip in the same way as the first at a distance of 165 mm (6 1/2") between both clips

-

Mark out and drill out the hole according to Net pocket, side panel See: Net Pocket, Side Panel , and continue according to points  Net pocket,
side panel See: Net Pocket, Side Panel  and  Net pocket, side panel See: Net Pocket, Side Panel 

-

Remove the end of the net from both clips.

-

Install the clip for the corresponding side in the same way according to points  Net pocket, side panel See: Net Pocket, Side Panel  -  Net pocket,
side panel See: Net Pocket, Side Panel 

-

Press the loose end of the net into the clips with the rivets pointing inwards according to point  Net pocket, side panel See: Net Pocket, Side Panel 

-

Reinstall the side panel. Secure the panel using the clips, plastic nut and the knob.

Organiser Bag

Organiser bag

Bag Holder|Page 27608 > < Bag Holder|Page 27606