V70 2.4 L5-2.4L VIN 61 B5244S (2001)
Install:
In reverse order.
B-post ventilation vent
Remove. See Removing the B-post panel.
Release the fastener.
Press out the vent.
Installing the B-post ventilation vent
Install:
In reverse order.
Tighten the seat belt. Tighten to 48 Nm.
Caution! When installing the B-post panel: Check that the wiring for the seat belt, tensioner and sensor is tensioned and secured in the correct
position. Otherwise the wiring may be damaged when the panel is installed.
Panel, C-Post, Replacing
Panel, C-post, replacing
Removing the C-post panel
