volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Bag Holder|Page 27624 > < Bag Holder|Page 27622
Page 43
background image

Applies to the rear doors:

-

Push in the centre of the clips (1). Remove the clips

-

Remove the blind cover plug (2) and the screw from under it

-

Remove the screw (3) in the door opener (4)

-

Disconnect the door panel (5). First slide the panel upwards and unhook the top edge.

-

Remove the connector (1) for the door control module

-

Pull the door opener handle (3). Remove the mechanical cable (2) on the reverse. First pry up the locking lugs

-

Remove the door panel.

-

Remove the six lock facings (1) holding the trim strip at the door panel. Use a screwdriver to pry up the lock facings slightly. Cut off the lock
facings using cutting pliers.

-

Remove the trim strip. First pull the door opener handle. Pull off the trim strip.

Bag Holder|Page 27624 > < Bag Holder|Page 27622