V70 2.4 L5-2.4L VIN 61 B5244S (2001)
-
push rod clip
-
push rod from brake pedal
-
the small bushing from the brake pedal.
Install the new bushing
Lubricate the new bushing using grease, P/N 1161241-3.
Install:
-
the bushing on the brake pedal
-
the push rod and the clip
-
the soundproofing panel.
Pedal Position Sensor, Replacing
Pedal Position Sensor, Replacing
NOTE: The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the essential
information in the illustrations is always correct.
Preparatory work
