V70 2.4 L5-2.4L VIN 61 B5244S (2001)
Use camshaft adjustment tool:
-
Install camshaft adjustment tool 999 5452 CAMSHAFT ADJUSTMENT TOOL See: Tools and Equipment/999 5452 Camshaft Adjustment Tool
at the rear of the camshafts.
Remove:
-
the plug at the front edge of the variable valve timing unit (TORX 55)
-
the center screw in the variable valve timing unit (TORX 55).
Carefully pull out the timing gear pulley with the VVT unit
-
timing gear pulley without VVT
-
the screws and the timing gear pulley.
Replacing the camshaft seal
Carefully press in tool 999 5651 Extractor See: Tools and Equipment/999 5651 Extractor between the sealing ring and the camshaft.
Carefully pry out the seal.
Cleaning
To clean the shaft journal and mating surface, use emery cloth P/N 951 1024.
Note! When cleaning work around the shaft journal, not in and out. It is essential that any residue from the emery cloth and any other
contaminants are completely removed before the new sealing ring is installed.