V70 2.4 L5-2.4L VIN 61 B5244S (2001)
-
Turn the timing gear pulley clockwise until the screws at the oval holes are in the limit position.
-
Continue turning clockwise until the timing gear pulley marking is 1 cog before the marking on the upper timing cover.
NOTE:
Do not turn counter-clockwise during this procedure!
-
Check that the timing gear pulley is still in its limit position at the oval holes.
-
Tighten the center screw for the variable valve timing (VVT) unit. Tighten to 120 Nm.
-
Check that the variable valve timing unit does not rotate when tightening.
-
Install the center plug. Tighten to 35 Nm.
Installing the timing gear pulley for the camshafts. Timing gear pulleys without variable valve timing units
-
Install the timing gear pulley on the intake camshaft with two screws, but do not tighten.
-
Adjust the timing gear pulleys so that the markings on the timing gear pulleys/upper timing cover correspond.
Timing belt, installing
Install the timing belt:
-
Tighten the center screw on the timing belt tensioner to 5 Nm.
-
Turn the variable valve timing unit clockwise to the stop.