V70 2.4 L5-2.4L VIN 61 B5244S (2001)
-
Hold the variable valve timing unit secure in the limit position. (As shown in the above figure).
Install the belt in the following order:
-
crankshaft
-
the idler pulley
-
intake cam pulley
-
exhaust cam pulley
-
water pump
-
belt tensioner.
NOTE:
Adjust the timing gear pulleys so that the screws are not at a limit position in the oval holes. Also check that the markings correspond.
Tighten the timing belt
-
This adjustment is carried out on a cold engine. A suitable temperature is approximately 20 degree C / 68 degree F.
-
At higher temperatures (with the engine at operating temperature or a high outside temperature for example) the indicator is further to the right.