V70 2.4 L5-2.4L VIN 61 B5244S (2001)
-
The above figure shows the position of the indicator when aligning the timing belt tensioner at different temperatures.
-
Hold the center screw secure and turn the belt tensioner eccentric counter-clockwise until the tensioner indicator passes the marked position.
NOTE:
Check that the variable valve timing unit is in its limit position.
-
Tighten the 3 screws on the timing gear pulley for the intake camshaft. Tighten to 10 Nm.
-
Install the screw missing on the exhaust timing belt pulley.
-
Tighten the 3 screws on the timing gear pulley for the exhaust camshaft. Tighten to 20 Nm.
-
Turn the eccentric back so that the indicator reaches the marked position in the center of the window. Remember to hold the center screw secure at
the same time.
-
Hold the eccentric secure and tighten the center screw. Tighten to 20 Nm.
-
Check that the indicator is in the correct position.
