V70 2.4 L5-2.4L VIN 61 B5244S (2001)
Install
-
front timing cover
-
the auxiliaries belt
-
the expansion tank
-
the servo oil reservoir
-
the bleed hose for the expansion tank. Tighten the clamp.
Check that the hoses are positioned correctly.
Connect the connectors for:
-
The ABS sensor by the right suspension turret
-
the coolant level sensor in the expansion tank.
Install
-
the starter motor
-
the pipe screw for the water heated crankcase ventilation at the rear of the cylinder head. Use new seal washers. Tighten to 26 Nm.
-
the trigger wheel. Ensure that the trigger wheel is correctly positioned against the camshaft
-
the camshaft position (CMP) sensor housing
-
a new cover at the rear edge of the exhaust camshaft
-
the upper torque rod bracket.
Installing the intake manifold and gasket
