volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Intake Manifold/Gasket, Replacing|Page 5930 > < Front Crankshaft Seal|Service and Repair|Page 5925
Page 1
background image

Intake Manifold Gasket: Service and Repair
Intake Manifold/Gasket, Replacing

Intake Manifold/Gasket, Replacing 

Special Tools:  951 2666

NOTE:  As the illustrations in this service information are used for different model years and/or models, some variation may occur. However, the
essential information is always correct.

Replacing the intake manifold and gasket 

Removing the intake manifold and gasket 

-

Disconnect the battery negative lead.

-

Drain the fuel injection system.

Remove 

-

the cover over the ignition coils

-

the crankcase ventilation hose from the top of the cam cover

-

the inlet hose from the air cleaner (ACL) and throttle body (TB)

-

the hose for the vacuum controlled crankcase ventilation from the inlet hose

-

the protective cover over the nozzle connectors

-

the connectors from the nozzles.

Intake Manifold/Gasket, Replacing|Page 5930 > < Front Crankshaft Seal|Service and Repair|Page 5925