V70 2.4 L5-2.4L VIN 61 B5244S (2001)
Intake Manifold Gasket: Service and Repair
Intake Pipe/Gasket, Replacement
Intake pipe/gasket, replacement
Special tools:
951 2666 Replaced by 9997298 See: Tools and Equipment/951 2666 Replaced By 9997298
Note! As the illustrations in this service information are used for different model years and / or models, some variation may occur. However,
the essential information is always correct.
Replacing the intake manifold and gasket
Removing the intake manifold and gasket
Disconnect the battery negative lead. First read Battery, disconnecting See: Starting and Charging/Battery/Service and Repair/Procedures/Battery,
Disconnecting.
Drain the fuel injection system. See Fuel system pressure release See: Cylinder Head Assembly/Fuel Pressure Release/Service and Repair.
Remove
-
the cover over the ignition coils
-
the crankcase ventilation hose from the top of the cam cover
-
the inlet hose from the air cleaner (ACL) and throttle body (TB)
-
the hose for the vacuum controlled crankcase ventilation from the inlet hose
-
the protective cover over the nozzle connectors
-
the connectors from the nozzles.
Separate the fuel line's quick-release connector, see also: Fuel line, lock See: Powertrain Management/Fuel Delivery and Air Induction/Fuel Rail/Service
and Repair. Use tool 951 2666 Replaced by 9997298 See: Tools and Equipment/951 2666 Replaced By 9997298.
Remove the mounting screws from the fuel rail.
Spray universal oil or similar around the injector nozzle at the terminal on the intake manifold.
Gently work the fuel rail and injector nozzles loose.
