volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Sensors and Switches - Engine > < Intake Manifold/Gasket, Replacing|Page 5934
Page 3
background image

-

the crankcase ventilation hose on the top of the cam cover. Use a new clamp

-

the vacuum hoses.

Ensure that the plastic nipple, located in the terminal at the intake for the crankcase ventilation hose, is in the correct position

-

the inlet hose between the air cleaner (ACL) and throttle body (TB)

-

the hose for vacuum controlled crankcase ventilation in the inlet hose

-

the cover over the ignition coils

-

the connectors to the throttle body (TB)

-

the dip stick in the intake manifold.

Install the battery negative lead. First read  Battery, disconnecting See: Starting and Charging/Battery/Service and Repair/Procedures/Battery,
Disconnecting.

Final check

Test drive the car. Check the following:

-

that there is no fuel leakage

-

that the engine operates normally.

Clean the engine compartment. Check that everything is in position.

Sensors and Switches - Engine > < Intake Manifold/Gasket, Replacing|Page 5934