V70 2.4 L5-2.4L VIN 61 B5244S (2001)
Removing the rubber bushings
3
Remove the rubber bushings from the mounting.
Note!
On S60 and V70 vehicles the bracket is welded to the catalytic converter.
Installing the rubber bushings
4
Install the new rubber bushings as illustrated.
Note!
The flatter side of the bushing should face the front of the car (see Arrow).
Installing bracket
5
Install:
-
the bracket for the sub frame using the screw and nut (2). Tighten to 50 Nm
-
the mounting (1) for the three-way catalytic converter (TWC)/exhaust system in the rubber bushings (S80 only). Tighten to 24 Nm
-
the clamp for the heated oxygen wiring.