V70 2.4 L5-2.4L VIN 61 B5244S (2001)
-
the screw for the bracket for the recirculation motor.
Loosen:
-
the catches for the divisions of the upper and lower sections using a screwdriver and pipe wrench. Start at one end.
-
Lift off the lower section
-
Lift out the evaporator.
Remove:
-
the expansion valve, (2 screws)
-
the expansion valve block
-
the seal.
Install:
NOTE: Use new O-rings lubricated with compressor oil.
-
O-rings on the evaporator pipe
-
the expansion valve.
-
Position the evaporator in the upper fan housing
