V70 2.4 L5-2.4L VIN 61 B5244S (2001)
-
Check that the seal sits in the correct groove at the expansion valve
-
Install the lower fan housing. Press so that the mounting lugs are in line with the upper half
-
Ensure that the mounting lugs line up
-
Check that the seal sits in the correct groove at the expansion valve
-
Press the upper fan housing into the lower
-
Check that the upper fan housing is secured to the lower
-
Install new retaining clips around the fan housing to ensure a good seal.
-
the central electrical unit seal
-
the central electrical unit. Screw it into place
-
the air cleaner (ACL) and cover
-
new inner and outer seals for the pipe lead-ins around the heat exchanger-refrigerant pipes.
-
the climate control unit.
-
the dashboard in the car.