V70 2.4 L5-2.4L VIN 61 B5244S (2001)
Ensure that all the residue is removed from the shaded surfaces shown in the illustration.
Carefully wipe the inside of the bore clean on both sides of the throttle disc. Wipe clean the edge of the throttle disc.
Do not use compressed air to dry the throttle module.
Installing the electronic throttle module (ETM)
Install:
-
the electronic throttle module (ETM) with a new gasket
-
Tighten the 4 x screws to 10 Nm.
Install:
-
the intake pipe between the air cleaner and the electronic throttle module (ETM).
-
the intake pipe between the air cleaner and the front cover plate.
Turn the ignition key to position 2
Install the battery negative lead to the battery.
Cleaning the Electronic Throttle Module (ETM), 5-Cyl Non-Turbo
Remove:
