volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Fuel/Emissions - ETM/Crankcase Ventilation Sys. Cleaning|Page 17544 > < Fuel/Emissions - ETM/Crankcase Ventilation Sys. Cleaning|Page 17542
Page 22
background image

-

the battery negative lead, see:

Electrical system Battery replacement

-

the intake hose between the front and air cleaner (ACL) housing

-

the charge air hose from the charge air pipe

-

the oil dipstick pipe.

The banjo nipple is located underneath the intake manifold, behind the mounting for the oil dipstick pipe.

Disconnect both the connectors from the charge air hose between the charge air cooler and electronic throttle module (ETM).

Remove:

-

the hose clamps

-

the by-pass valve from the charge air hose.

Remove the hose clamp for the charge air pipe on the electronic throttle module (ETM) and the charge air cooler (CAC). Remove the charge air pipe
from the electronic throttle module (ETM) and the charge air cooler (CAC).

Fuel/Emissions - ETM/Crankcase Ventilation Sys. Cleaning|Page 17544 > < Fuel/Emissions - ETM/Crankcase Ventilation Sys. Cleaning|Page 17542