V70 2.4 L5-2.4L VIN 61 B5244S (2001)
secure the cable harness at the fan cowling. See illustration. Fit the EVAP-valve.
Plug in the electric cooling fan connectors.
Install:
-
the charge air hose/charge air pipe between the intercooler and the rubber connection on the turbocharger
-
the two charge air pipe bolts on the intake manifold
-
the intake manifold to the air filter housing
-
the intake manifold between the front and air filter housing.
Install:
-
dip stick guide tube Turn the ignition key to position 2.
Connect the battery cable to the negative battery terminal.
Ordering and downloading software
Note!
After ETM reload the ECM must be upgraded.
Order and download software for ETM reload and ECM gasoline upgrade.
Finishing work
Check that no diagnostic trouble codes were stored in the control module during repair work.
Test drive the car and check the functionality of the engine.
Detach the battery cable from the negative battery terminal.
