V70 2.4 L5-2.4L VIN 61 B5244S (2001)
Remove the dipstick guide tube.
Removing the electronic throttle module] (ETM)
Loosen the hose clamp of the charge air pipe on the electronic throttle module (ETM). Remove the charge air pipe from the electronic throttle
module (ETM).
Remove:
-
the intake manifold between the front and air filter housing.
-
the four bolts holding the fan cowling cover in place.
Move the cover aside slightly, pull up on the relay holder and unplug the fan connectors.
Remove:
-
the charge air hose from the intercooler
-
hoses and electrical cables from their retainers
-
the two electric cooling fan relays from the fan cowling by bending the relays in toward the engine compartment and pulling up.
Open the cable ties of the electrical cables.
Remove:
-
the connectors with retainers on both sides of the fan cowling
-
the EVAP valve from the fan cowling
-
the fan with cowling
