V70 2.4 L5-2.4L VIN 61 B5244S (2001)
Install the charge air pipe to the electronic throttle module (ETM). Tighten the hose clamp of the charge air pipe on the electronic throttle module
(ETM).
Install:
-
dipstick guide tube
-
the intake manifold between the front and air filter housing.
Turn the ignition key to position 2. Connect the battery cable to the negative battery terminal.
Ordering and downloading software
Note!
After ETM reload the ECM must be upgraded.
Order and download software for ETM reload and ECM gasoline upgrade.
Finishing work
Check that no diagnostic trouble codes were stored in the control module during repair work. Test drive the car and check the functionality of the engine.
S70 1999-2000 S60 2001-2002 V70 1999-2002 5-CYL Non-Turbo
Electronic Throttle Module (ETM) replacement 5-cyl Non-turbo S70 1999-2000 S60 2001-2002 V70 1999-2002
Note!
The method applies to only replacing the throttle module for the S70 1999-2000 S60 2001-2002 V70 1999-2002 5-cyl Non-turbo
Remove:
-
the battery negative lead from the battery. When removing and installing the battery leads. See: Electrical system, Battery replacement.
Remove:
-
the intake pipe between the front cover plate and the air cleaner.
-
the intake pipe between the air cleaner.
Remove:
