volvo Workshop Repair Guides

Volvo Workshop Manuals

< PREV PAGE NEXT PAGE >
Page 3
background image

Center the control module on the ABS hydraulic modulator valves before the valves are pushed into place.

Install:

-

the control module. Tighten to 1.8 Nm

-

the connectors for the pump motor and the control module

-

the integrated relay / fusebox. See Hydraulic unit, replacing See: Brakes and Traction Control/Antilock Brakes / Traction Control
Systems/Hydraulic Control Assembly - Antilock Brakes/Service and Repair 

-

the air cleaner (ACL) housing. See Brake pipe master cylinder / ABS unit, replacing See: Brakes and Traction Control/Hydraulic System/Brake
Hose/Line/Service and Repair/Brake Pipe Master Cylinder / ABS Unit, Replacing.

Function test

 Wheel sensor, front, replacing See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Wheel Speed Sensor/Service and
Repair/Wheel Sensor Front, Replacing.

Relays and Modules > Relays and Modules - Brakes and Traction Control > Electronic Brake Control Module > Component Information > Service and Repair > Brake Control Module (BCM), Replacing > Page 212

< PREV PAGE NEXT PAGE >