volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Removal and Replacement|Page 23216 > < Removal and Replacement|Page 23214
Page 5
background image

Right-hand drive:

-

Remove the collision protection system over the steering gear (2 screws).

-

Place a container under the steering gear to collect the oil.

-

Disconnect the oil pipes from the steering gear.

Removing the nuts and screw for the steering gear

Remove the four nuts and the screw holding the steering gear to the sub-frame.

Right-hand drive:

Remove the nut (A) holding the lower half of the collision protection.

Lowering the sub-frame at the rear edge

Removal and Replacement|Page 23216 > < Removal and Replacement|Page 23214