V70 2.4 L5-2.4L VIN 61 B5244S (2001)
-
the shock absorber upper bearing in reverse order. Tighten to 25 Nm
-
the shock absorber and spring. See Spring rear, replacing See: Suspension Spring ( Coil / Leaf )/Service and Repair/Rear Suspension/Spring Rear,
Replacing.
Shock Absorber Rear, Replacing
Shock absorber rear, replacing
Special tools:
999 7079 striker plate See: Tools and Equipment/999 7079 Striker Plate
999 5500 SOCKET UPPER NUT REAR SHOCK ABSORBER See: Tools and Equipment/999 5500 Socket Upper Nut Rear Shock Absorber
Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the
essential information in the illustrations is always correct.
Preparatory work
For cars equipped with Four-C (Continuously Controlled Chassis Concept), replace the shock absorber. See: Shock absorber rear, replacing (Four-C)
See: Rear Suspension/Shock Absorber Rear, Replacing (Four-C).
Raise the car. Install:999 7079 striker plate See: Tools and Equipment/999 7079 Striker Plate to secure the spring.
Lower the vehicle.
Removal
Removing the upper mounting for the shock absorber
