V70 2.4 L5-2.4L VIN 61 B5244S (2001)
Installing the spring strut
5
Install:
^
the spring strut. Hand tighten the three nuts
^
the two screws for the wheel spindle. Tighten to 90 Nm
^
the link for the anti-roll bar. Tighten to 45 Nm
^
the brake hose and the ABS cable in the bracket the three nuts. Tighten to 40 Nm.
Installing the wheels
6
Install the wheel.
Ensure that the brake disc and wheel rim mating surfaces are clean.
Lubricate the hub guide for the rims using installation paste (P/N 116 1397).
Install the wheel. Hand tighten the nuts. Tighten crosswise. Tighten to 110 Nm.
When tightening with a pneumatic impact wrench, use torque socket 9512834-8 only. Post-tighten using a hand-held tool.
Note!
The correct tightening torques and crosswise tightening are important to avoid stresses in the brake disc.
Install the hub cap.