V70 2.4 L5-2.4L VIN 61 B5244S (2001)
Install: 999 5716 Reading off tool See: Tools and Equipment/999 5716 Reading Off Tool directly over the engine lifting eyelet.
Position the lifting beam brackets as illustrated.
Connect: 999 5460 Lifting hook See: Tools and Equipment/999 5460 Lifting Hook to the lifting eyelet at the rear edge of the engine. Apply the hook to
relieve the load from the engine pads.
Note! Position the front lift arms so that they do not obstruct the sub-frame support plates.
Remove both screws for the front splash guard. Press in the catches at the front edge of the guard. Pull the cover straight back.
Remove:
-
the screw for the ground lead bracket on the sub-frame
Note! Only applies to vehicles with parking heaters.
-
the 3 x screws for the heater on the sub-frame.
Hang or tie up the heater on the left front wing.
Unhook the fuel line from the mountings on the sub-frame.
