V70 2.4T L5-2.4L Turbo VIN 58 B5244T3 (2002)
-
remove both the screws.
Remove:
-
Remove the integrated relay / fusebox from the bracket
-
lift up the box at the front (1). Press the box (2) to the side. Then angle the box out of the bracket (3).
Brake pipe left front, replacing
Clean around the brake pipe on the ABS hydraulic modulator.
Remove the brake pipe from the ABS hydraulic modulator and the clips
Blow clean around the brake pipe using compressed air.
Place paper under the ABS hydraulic modulator as protection against brake fluid spillage.
Remove:
-
the brake pipe from the ABS hydraulic modulator
-
the brake pipe from its clips and holder. Open the holder.
Note! Do not damage the ABS line.
