V70 2.4T L5-2.4L Turbo VIN 58 B5244T3 (2002)
-
Remove the mounting screws from the fuel rail.
-
Separate the fuel line quick-release connector. Use tool 951 2666.
-
Spray universal oil or similar around the injector nozzle at the terminal on the intake manifold.
-
Gently work the fuel rail and injector nozzles loose.
-
Remove
-
the dipstick bracket
-
the lower screws for the intake manifold a few turns.
-
the mounting screws in the upper row and the outer screws in the lower row
-
the intake manifold by lifting it approximately 20 mm.
Allow the crankcase ventilation hose to run through the intake manifold without disconnecting it from the flame trap.
