V70 2.4T L5-2.4L Turbo VIN 58 B5244T3 (2002)
Cylinder Head Gasket: Service and Repair
Cylinder head/gasket, replacing
Special tools:
999 5452 CAMSHAFT ADJUSTMENT TOOL See: Tools and Equipment/999 5452 Camshaft Adjustment Tool
999 5454 PRESS TOOL See: Tools and Equipment/999 5454 Press Tool
999 5670 Pliers See: Tools and Equipment/999 5670 Pliers
999 5451 ADJUSTMENT TOOL See: Tools and Equipment/999 5451 Adjustment Tool
951 2050 BEVEL PROTRACTOR See: Tools and Equipment/951 2050 Bevel Protractor
951 2767 Roller See: Tools and Equipment/951 2767 Roller
999 5450 PUNCH See: Tools and Equipment/999 5450 Punch
999 5718 Drift See: Tools and Equipment/999 5718 Drift
999 5719 Drift See: Tools and Equipment/999 5719 Drift
Note! Since the illustrations in the information are used for different model years and/or models, there may be some deviations. However, the
essential information in the illustrations is always correct.
Removing the cylinder head gasket
Preparation
Remove
-
the radiator breather tube from the expansion tank. Install lock grip pliers
-
the negative battery lead. First read Battery, disconnecting See: Starting and Charging/Battery/Service and Repair/Procedures/Battery,
Disconnecting.
-
the right front wheel.
Draining coolant
Raise the car.
Remove the splash guard under the engine.
Open the engine nipple.
Drain the coolant into a container.
Close the nipple.